The 30-Second Answer
Choose the Lanshan 1 if you hike alone and want a beginner-friendly, double-wall trekking-pole tent with factory-taped seams. Choose the Lanshan 1 Pro if you hike alone, prioritize the lowest weight, and are comfortable with a single-wall shelter and seam sealing. For two people, the Lanshan 2 is the more practical choice for beginners, humid conditions, and users who prefer a separate inner tent. The Lanshan 2 Pro is the lighter option at a listed minimum weight of 870 g, but it requires seam sealing and more careful condensation management. In simple terms: choose a standard Lanshan for easier use and a Pro model for lower weight. The correct model also depends on whether you already carry suitable trekking poles and where you normally camp.
Lanshan Decision Table
| Your priority | Recommended model | Why | Not ideal if |
|---|---|---|---|
| Solo use, lower price, double-wall design | Lanshan 1 | 740 g minimum weight, factory-taped seams, separate inner tent | You want the lowest possible weight |
| Solo use, maximum weight savings | Lanshan 1 Pro | 666 g minimum weight and smaller packed size | You dislike seam sealing or single-wall tents |
| Two people, easier setup and better separation from condensation | Lanshan 2 | Double-wall construction, two doors, two vestibules | You want the lightest two-person shelter |
| Two people, minimum shelter weight | Lanshan 2 Pro | 870 g minimum weight, two doors, two vestibules | You are new to trekking-pole tents |
The listed weights are minimum weights, not confirmed packed or carried weights. Add stakes, guylines, stuff sacks, repair items, and any support poles when calculating the weight in your backpack.
Choose by Number of People
One person
For solo hiking, choose between the Lanshan 1 and Lanshan 1 Pro.
The Lanshan 1 is a double-wall shelter. It uses one trekking pole, has a separate inner tent, and lists a minimum weight of 740 g. The inner can be configured with mesh or solid fabric, depending on your preferred balance between airflow and wind blocking.
The Lanshan 1 Pro is a single-wall shelter with a listed minimum weight of 666 g. It removes the separate inner tent, which reduces weight and packed volume. However, condensation forms directly on the inside of the outer canopy, so ventilation and pitching technique are more important.
A solo tent is generally the right size if you use a standard-width sleeping pad and do not need to keep a large backpack inside the sleeping area. Tall hikers, users of wide pads, or anyone who spends long periods inside during rain should check the current floor dimensions before ordering.
The Lanshan 1 and Lanshan 1 Pro both require a trekking pole adjusted to approximately 120–125 cm. The pole is not included in the listed minimum tent weight.
Two people
For couples or hiking partners, choose the Lanshan 2 or Lanshan 2 Pro.
Both models provide two entrances and two vestibules. Each person can enter independently and store gear on their own side. This arrangement is more convenient than a two-person tent with a single entrance.
The Lanshan 2 is double-wall and lists a minimum weight of 1,045 g. The Lanshan 2 Pro is single-wall and lists a minimum weight of 870 g.
A two-person shelter can also be used by one person who wants additional space, but the added floor area, fabric, and support requirements increase the weight compared with a solo model.
Choose by Weight
Maximum weight savings
If minimum shelter weight is your primary concern, choose a Pro model.
The Lanshan 1 Pro lists a minimum weight of 666 g, compared with 740 g for the Lanshan 1. The Pro model saves 74 g on the manufacturer’s minimum figures.
For two people, the Lanshan 2 Pro lists a minimum weight of 870 g, compared with 1,045 g for the Lanshan 2. The difference is 175 g, or approximately 17% of the standard model’s listed minimum weight.
The lower weight comes mainly from the single-wall construction. There is no separate inner tent, so the shelter uses less fabric and packs smaller.
However, the final carried weight will be higher than the published minimum. Include:
- Stakes
- Guylines
- Stuff sacks
- Repair materials
- Seam-sealing materials or service
- Trekking poles, if purchased specifically for the tent
Lanshan’s current product pages do not publish separate packed-weight figures for these models. It is therefore more accurate to describe 666 g and 870 g as listed minimum weights rather than all-in trail weights.
More traditional shelter design
Choose the standard Lanshan 1 or Lanshan 2 if you prefer a more traditional double-wall shelter.
The standard models are heavier because they include a separate inner tent, but that inner provides a physical buffer between the occupant and the rainfly. The design can be more forgiving when condensation forms on the outer fabric.
The standard models also use factory-taped seams. This reduces preparation before the first trip and avoids the additional seam-sealing step required by the Pro models.
For many hikers, the extra weight is a reasonable exchange for simpler preparation and easier moisture management.
Choose by Weather and Climate
Humid conditions
For humid or damp environments, the standard Lanshan models are generally easier to manage. The separate inner tent keeps the sleeper farther away from condensation on the rainfly.
The Lanshan 1 and Lanshan 2 can be ordered with mesh inners that support airflow and insect protection. Keep the vents open when conditions allow, and avoid pitching in low areas where cold air and moisture collect.
The Pro models can also be used in humid conditions, but they require more attention. Because they are single-wall shelters, condensation can form directly above a sleeping bag or clothing. Good ventilation and a tight pitch are especially important.
No tent completely prevents condensation. Weather, ground moisture, occupancy, ventilation, and the difference between indoor and outdoor temperature all affect the result.
Rain
The standard Lanshan 1 and Lanshan 2 use factory-taped seams. This means they are ready for normal use without the same DIY seam-sealing requirement as the Pro models.
The Lanshan 1 Pro and Lanshan 2 Pro require seam sealing before use. Silicone-treated fabric cannot use the same polyurethane tape process used on the standard models.
A correctly sealed and pitched shelter can provide rain protection, but the user must also consider:
- Door orientation
- Ground drainage
- Splashback
- Fly tension
- Ventilation
- The possibility of water flowing beneath the floor
The 2026 Lanshan 1 version, released in July 2025, uses a waterproof zipper and updated reinforcement around the vent area. The Lanshan 2 page also identifies the current updated 2026 version, following improvements introduced in 2025, including a waterproof zipper, stronger hooks, and vent-area reinforcement.
Cold conditions
The standard Lanshan 1 and Lanshan 2 offer solid-fabric inner options. These can block more wind than mesh inners and may be useful at exposed campsites or in cooler conditions.
A solid inner reduces airflow, however, so condensation still needs to be monitored. Cold-weather camping may also involve frozen ground, snow loading, stronger winds, and limited daylight for drying wet gear.
The existence of a solid inner does not mean that the tent is suitable for every winter, alpine, or mountaineering trip. Select a shelter according to the expected conditions, route exposure, snow, wind, and your level of experience.
Wind
The stability of a Lanshan tent depends on proper staking, fabric tension, guyline use, shelter orientation, and ground conditions.
In exposed locations:
- Use the available guylines.
- Place stakes at appropriate angles.
- Align the shelter with prevailing wind where possible.
- Check that the ground can hold the stakes.
- Retension the shelter if the fabric loosens.
A trekking-pole tent may perform well in wind when correctly pitched, but it is less suitable for a campsite where secure anchors are unavailable.
Choose by Experience Level
Beginners
For a first Lanshan, the standard models are usually easier to learn:
- Solo hikers: choose the Lanshan 1.
- Two-person users: choose the Lanshan 2.
The double-wall construction provides more separation from condensation, and the factory-taped seams remove one preparation step.
You still need to learn how to position the stakes, set the trekking pole height, tension the fabric, and use the guylines. Practice at home before taking the tent on a remote trip.
A beginner should also confirm that their trekking poles can be adjusted to approximately 120–125 cm and that the pole tips fit securely into the shelter’s support points.
Experienced hikers
Experienced backpackers may prefer the Pro models. They are more likely to understand the requirements of a single-wall shelter, have suitable trekking poles, and know how to manage condensation through ventilation and campsite selection.
The Pro models also make sense for hikers who frequently carry their shelter over long distances and are willing to seam seal the tent before use.
Gram counters
For the lowest listed Lanshan minimum weight, choose the Lanshan 1 Pro for solo use or the Lanshan 2 Pro for two people.
Remember that gram savings should be evaluated across the complete shelter system. If you need to purchase trekking poles, ultralight stakes, seam-sealing materials, or replacement guylines, include those items in both the cost and weight calculations.
Choose by Budget
The standard Lanshan models have the lowest listed prices in the range:
- Lanshan 1: approximately €108
- Lanshan 2: approximately €124
- Lanshan 1 Pro: approximately €146
- Lanshan 2 Pro: approximately €156
The standard models cost less and include factory-taped seams. They may therefore have a lower total starting cost for first-time users.
The Pro models cost more despite being lighter. Part of the additional cost is associated with the lighter construction and updated materials. If you choose DIY seam sealing, add the cost of sealant. If you choose the manufacturer’s service, add the service charge and consider any processing delay.
For comparison with other brands, read Best Budget Ultralight Tents, Best Ultralight 1-Person Tents, and Best Ultralight 2-Person Tents.
Full Lanshan Comparison Table
| Specification | Lanshan 1 | Lanshan 1 Pro | Lanshan 2 | Lanshan 2 Pro |
|---|---|---|---|---|
| Capacity | 1 person | 1 person | 2 people | 2 people |
| Construction | Double-wall | Single-wall | Double-wall | Single-wall |
| Listed minimum weight | 740 g | 666 g | 1,045 g | 870 g |
| Packed/carried weight | Not separately published | Not separately published | Not separately published | Not separately published |
| Required trekking poles | 1 | 1 | 2 | 2 |
| Recommended pole length | 120–125 cm | 120–125 cm | 120–125 cm | 120–125 cm |
| Listed packed size | 32 × 14 × 14 cm | 26 × 14 × 14 cm | 35 × 15 × 15 cm | 30 × 14 × 14 cm |
| Entrances | 1 | 1 | 2 | 2 |
| Vestibules | 1 | 1 | 2 | 2 |
| Seam sealing before use | No; factory taped | Yes | No; factory taped | Yes |
| Current product generation | 2026 version | Updated Pro Gen2 | 2026 version | Current Pro version |
| Approx. price | €108 | €146 | €124 | €156 |
The table uses product-page data available at the time of writing. Product specifications can vary by fabric, inner configuration, region, and future production updates. Verify the selected configuration on the product page before purchase.
Our Recommendations
For the simplest buying decision:
- Choose Lanshan 1 for solo backpacking, double-wall construction, and a lower purchase price.
- Choose Lanshan 1 Pro for the lowest solo minimum weight and a smaller packed shelter.
- Choose Lanshan 2 for couples, beginners, humid conditions, and factory-taped seams.
- Choose Lanshan 2 Pro for experienced two-person hikers who want to save 175 g.
For most first-time buyers, the standard models are the safer starting point because they are double-wall and do not require seam sealing.
For experienced ultralight hikers, the Pro models offer lower listed minimum weights and smaller packed sizes. Their advantages are most useful when you already understand trekking-pole pitching and single-wall condensation.
If you are unsure, choose based on this priority order:
- Number of users
- Double-wall or single-wall preference
- Climate and campsite conditions
- Experience with trekking-pole tents
- Complete system weight and total cost
For technical specifications, visit the Lanshan specifications guide.
FAQ
Which Lanshan is best for beginners?
The Lanshan 1 is the best starting point for solo beginners, while the Lanshan 2 is the better choice for two people. Both are double-wall tents with factory-taped seams, so they require less preparation than the Pro models.
Which Lanshan is lightest?
The Lanshan 1 Pro is the lightest Lanshan model, with a listed minimum weight of 666 g. The lightest two-person option is the Lanshan 2 Pro, at 870 g minimum weight.
Which Lanshan is best for couples?
The Lanshan 2 is generally the better choice for couples who want a double-wall tent, two entrances, and two vestibules. The Lanshan 2 Pro is better if both users are experienced with single-wall shelters and want to reduce weight.
Which Lanshan is best for thru-hiking?
The best model depends on your experience and route climate. Experienced thru-hikers may prefer the Lanshan 1 Pro or Lanshan 2 Pro because of their lower minimum weights. Hikers who prefer easier condensation management may choose the standard Lanshan 1 or Lanshan 2.
Is Lanshan 1 or 1 Pro better?
The Lanshan 1 is better for beginners, humid conditions, and users who want a double-wall tent with factory-taped seams. The Lanshan 1 Pro is better for experienced hikers who prioritize lower weight and smaller packed volume.
Is Lanshan 2 or 2 Pro better?
The Lanshan 2 is better for beginners, couples who prefer a double-wall shelter, and users who do not want to seam seal their tent. The Lanshan 2 Pro is better for experienced hikers who want to reduce the listed minimum weight from 1,045 g to 870 g.
What is the difference between Lanshan Pro and standard models?
The standard Lanshan 1 and 2 are double-wall tents with separate inner tents and factory-taped seams. The Lanshan 1 Pro and 2 Pro are single-wall tents that weigh less and pack smaller, but require seam sealing and more careful condensation management.
Do all Lanshan tents require trekking poles?
Yes. The Lanshan 1 and Lanshan 1 Pro require one trekking pole. The Lanshan 2 and Lanshan 2 Pro require two trekking poles. The recommended pole length is approximately 120–125 cm.